B-Cut Bevel Plasma

Positioning Speed 10.000 mm/min Lift Positioning Speed 30.000 mm/min Tilt X Positioning 30.000 mm/min Tilt Y Torch Positioning Angle ±45™+2™ Torch Lift Stroke 300 mm Height Control Sensitivity 2 min. angle
Ability to cut at 5 axes continuously Inclined cutting of parts with complicated geometry Time exectiveness during welded installation works Performance of both cutting and welding grooving processes in single operation.
Cutting head can implement progressive and continuous cutting at X, Y, Z, ROTATE and TILT axes. Cuts can reach to 50 mm thickness on black iron sheet at 450 + 20 by means of Hypertherm HPR400XD plazma cutting system. Axes are driven with Harmonic Drive motors, patented product of Harmonic Drive AG. On both axes Harmonic Drive i:50 transmission rated drive motors are employed. Height Control is being implemented with Arc Voltage surveillance, and sensitive screwed axle is being performed via linear skid including module and sensors. Module speed can reach till 10.000 mm/min. Magnetic separation plates and proximity sensors are employed for collision control. Thus, damaging torch due to collision during operation is prevented. Sending cutting head to 0 point on both axes is maintained electronically by means of a single button. As our Harmonic Drive motors are installed into the specially designed sleeve body, full protection against damaging is maintained. Continuous inclined cutting process is being maintained via Pronest and Hypertherm control software. True Hole technology, supplied by Hypertherm, is increasing the quality on bevel product. Sensitive cutting can be maintained with minimum loss by means of fine resetting of the part via laser diode, installed onto the Bevel cutting head.
B-CUT Width(mm) Length(mm) Height(mm) Cutting Width(mm) Cutting Length(mm) Weight (KGS)
B - 15/30 2650 4400 2150 1650 3150 3050
B - 20/40 3150 5400 2150 2150 4200 4000
B - 20/60 3150 7400 2150 2150 6300 4750
B - 30/60 4150 7400 2150 2150 6300 6200
B - 30/80 4150 9400 2150 3150 8400 7600
B - 30/120 4150 13400 2150 3150 12600 10200
B - 30/160 4150 17400 2150 3150 16800 12900
B - 30/200 4150 21400 2150 3150 21000 15500
B - 40/60 5150 7400 2150 4150 6300 7700
B - 40/80 5150 9400 2150 4150 8400 9500
B - 0/120 5150 13400 2150 4150 12600 13000
B - 40/160 5150 17400 2150 4150 16800 16500
B - 40/200 5150 21400 2150 4150 21000 20000